2026 Vermeer® Bale Processors CPX9000

Information

2026 Vermeer® Bale Processors CPX9000

Vermeer bale processors quickly grind up hay bales and lay down windrows to provide equal feeding room for cattle. As the bales are processed, dust and mold are blown away and the hay is aerated, allowing it to become more palatable for your herd.

Bale processors can also be used for bunk feeding, creating hay material for total mixed rations (TMR), blowing bedding into barns or forage into storage bunkers, or distributing a consistent layer of straw to help reduce erosion in land reclamation projects.

Features may include:

Consistent Spread

Maximize productivity with the automatic bale feed system, ensuring smooth material feeding through automatic forward or reverse to help reduce operator steps and tractor power requirements.

Achieve consistent material flow with direct feed from a dual fan air circulation system, minimizing the fluctuations typical in non-direct feed systems.

Built to Last

Enjoy enhanced durability with replaceable, abrasive-resistant steel liners, ideal for processing contamination-filled materials like cornstalks.

Convenient Operation

Choose how the spout is angled and how the crop is distributed with hydraulic controls. Operators can change the angle of the deflector up to a 90-degree angle, making it ideal for curbside applications.

Photos

Highlights

  • Hazlehurst, Georgia
  • 2026
  • Vermeer®
  • Bale Processors CPX9000
  • Available
  • 10 ft

Specifications

  • 2026
  • Vermeer®
  • Bale Processors
  • CPX9000
  • General
  • Recommended: 150 hp
  • 110 hp (82 kW)
  • Blower: (2) 38.6 in (98 cm) blower fans (1500 rpm front and 1000 rpm rear)
  • 210 hp
  • 1000 rpm
  • Torque Protection: 2 shear hubs
  • 16L-16.1SL 6 SofTrac II
  • Flail Drum: 1000 rpm
  • Front: 1500 rpm | Rear: 1000 rpm
  • 2000 psi
  • 2 double-acting
  • Rate: 8 gpm
  • Axle adjustment: 12 in (30.5 cm) each axle | Bale rotation: 3 roller chains with bolt-on cross slat | Cut Control Bar Quantity: 7 | Flail: 7/16 in x 5-9/16 in (1.1 cm x 14.1 cm) in tempered spring | Flail Drum Diameter: 26.8 in | Horizontal spread distance: Up to 100 ft (30.5 m)
  • 10 ft
  • 8.4 ft
  • 19.8 ft
  • 15.6 ft | Flail Drum: 78 in
  • Size: (2) bales, 6 ft x 5 ft (1.8 m x 1.5 m)
  • 7460 lbs | Drawbar: 2500 lbs | Bale capacity: 2500 lbs
  • Cut Control Bar Adjustment: Hand lever with 5 settings | Discharge Direction: Right and left hand, a 260-deg rotation
  • Drum: 30